Skip to main content
Version: v1.15.0

Shaping Zeek NDJSON

As described in Reading Zeek Log Formats, logs output by Zeek in NDJSON format lose much of their rich data typing that was originally present inside Zeek. This detail can be restored using a Zed shaper, such as the reference shaper.zed described below.

A full description of all that's possible with shapers is beyond the scope of this doc. However, this example for shaping Zeek NDJSON is quite simple and is described below.

Zeek Version/Configuration

The fields and data types in the reference shaper.zed reflect the default NDJSON-format logs output by Zeek releases up to the version number referenced in the comments at the top of that file. They have been revisited periodically as new Zeek versions have been released.

Most changes we've observed in Zeek logs between versions have involved only the addition of new fields. Because of this, we expect the shaper should be usable as is for Zeek releases older than the one most recently tested, since fields in the shaper not present in your environment would just be filled in with null values.

Zeek v4.1.0 is the first release we've seen since starting to maintain this reference shaper where field names for the same log type have changed between releases. Because of this, as shown below, the shaper includes switch logic that applies different type definitions based on the observed field names that are known to be specific to newer Zeek releases.

All attempts will be made to update this reference shaper in a timely manner as new Zeek versions are released. However, if you have modified your Zeek installation with packages or other customizations, or if you are using a Corelight Sensor that produces Zeek logs with many fields and logs beyond those found in open source Zeek, the reference shaper will not cover all the fields in your logs. As described below, the reference shaper will assign inferred types to such additional fields. By exploring your data, you can then iteratively enhance your shaper to match your environment. If you need assistance, please speak up on our public Slack.

Reference Shaper Contents

The following reference shaper.zed may seem large, but ultimately it follows a fairly simple pattern that repeats across the many Zeek log types.

// This reference Zed shaper for Zeek NDJSON logs was most recently tested with
// Zeek v4.1.0. The fields and data types reflect the default NDJSON
// logs output by that Zeek version when using the JSON Streaming Logs package.

type port=uint16
type zenum=string
type conn_id={orig_h:ip,orig_p:port,resp_h:ip,resp_p:port}

// This first block of type definitions covers the fields we've observed in
// an out-of-the-box Zeek v4.0.3 and earlier, as well as all out-of-the-box
// Zeek v4.1.0 log types except for "ssl" and "x509".

type broker={_path:string,ts:time,ty:zenum,ev:string,peer:{address:string,bound_port:port},message:string,_write_ts:time}
type capture_loss={_path:string,ts:time,ts_delta:duration,peer:string,gaps:uint64,acks:uint64,percent_lost:float64,_write_ts:time}
type cluster={_path:string,ts:time,node:string,message:string,_write_ts:time}
type config={_path:string,ts:time,id:string,old_value:string,new_value:string,location:string,_write_ts:time}
type conn={_path:string,ts:time,uid:string,id:conn_id,proto:zenum,service:string,duration:duration,orig_bytes:uint64,resp_bytes:uint64,conn_state:string,local_orig:bool,local_resp:bool,missed_bytes:uint64,history:string,orig_pkts:uint64,orig_ip_bytes:uint64,resp_pkts:uint64,resp_ip_bytes:uint64,tunnel_parents:|[string]|,_write_ts:time}
type dce_rpc={_path:string,ts:time,uid:string,id:conn_id,rtt:duration,named_pipe:string,endpoint:string,operation:string,_write_ts:time}
type dhcp={_path:string,ts:time,uids:|[string]|,client_addr:ip,server_addr:ip,mac:string,host_name:string,client_fqdn:string,domain:string,requested_addr:ip,assigned_addr:ip,lease_time:duration,client_message:string,server_message:string,msg_types:[string],duration:duration,_write_ts:time}
type dnp3={_path:string,ts:time,uid:string,id:conn_id,fc_request:string,fc_reply:string,iin:uint64,_write_ts:time}
type dns={_path:string,ts:time,uid:string,id:conn_id,proto:zenum,trans_id:uint64,rtt:duration,query:string,qclass:uint64,qclass_name:string,qtype:uint64,qtype_name:string,rcode:uint64,rcode_name:string,AA:bool,TC:bool,RD:bool,RA:bool,Z:uint64,answers:[string],TTLs:[duration],rejected:bool,_write_ts:time}
type dpd={_path:string,ts:time,uid:string,id:conn_id,proto:zenum,analyzer:string,failure_reason:string,_write_ts:time}
type files={_path:string,ts:time,fuid:string,tx_hosts:|[ip]|,rx_hosts:|[ip]|,conn_uids:|[string]|,source:string,depth:uint64,analyzers:|[string]|,mime_type:string,filename:string,duration:duration,local_orig:bool,is_orig:bool,seen_bytes:uint64,total_bytes:uint64,missing_bytes:uint64,overflow_bytes:uint64,timedout:bool,parent_fuid:string,md5:string,sha1:string,sha256:string,extracted:string,extracted_cutoff:bool,extracted_size:uint64,_write_ts:time}
type ftp={_path:string,ts:time,uid:string,id:conn_id,user:string,password:string,command:string,arg:string,mime_type:string,file_size:uint64,reply_code:uint64,reply_msg:string,data_channel:{passive:bool,orig_h:ip,resp_h:ip,resp_p:port},fuid:string,_write_ts:time}
type http={_path:string,ts:time,uid:string,id:conn_id,trans_depth:uint64,method:string,host:string,uri:string,referrer:string,version:string,user_agent:string,origin:string,request_body_len:uint64,response_body_len:uint64,status_code:uint64,status_msg:string,info_code:uint64,info_msg:string,tags:|[zenum]|,username:string,password:string,proxied:|[string]|,orig_fuids:[string],orig_filenames:[string],orig_mime_types:[string],resp_fuids:[string],resp_filenames:[string],resp_mime_types:[string],_write_ts:time}
type intel={_path:string,ts:time,uid:string,id:conn_id,seen:{indicator:string,indicator_type:zenum,where:zenum,node:string},matched:|[zenum]|,sources:|[string]|,fuid:string,file_mime_type:string,file_desc:string,_write_ts:time}
type irc={_path:string,ts:time,uid:string,id:conn_id,nick:string,user:string,command:string,value:string,addl:string,dcc_file_name:string,dcc_file_size:uint64,dcc_mime_type:string,fuid:string,_write_ts:time}
type kerberos={_path:string,ts:time,uid:string,id:conn_id,request_type:string,client:string,service:string,success:bool,error_msg:string,from:time,till:time,cipher:string,forwardable:bool,renewable:bool,client_cert_subject:string,client_cert_fuid:string,server_cert_subject:string,server_cert_fuid:string,_write_ts:time}
type known_certs={_path:string,ts:time,host:ip,port_num:port,subject:string,issuer_subject:string,serial:string,_write_ts:time}
type known_hosts={_path:string,ts:time,host:ip,_write_ts:time}
type known_services={_path:string,ts:time,host:ip,port_num:port,port_proto:zenum,service:|[string]|,_write_ts:time}
type loaded_scripts={_path:string,name:string,_write_ts:time}
type modbus={_path:string,ts:time,uid:string,id:conn_id,func:string,exception:string,_write_ts:time}
type mysql={_path:string,ts:time,uid:string,id:conn_id,cmd:string,arg:string,success:bool,rows:uint64,response:string,_write_ts:time}
type netcontrol={_path:string,ts:time,rule_id:string,category:zenum,cmd:string,state:zenum,action:string,target:zenum,entity_type:string,entity:string,mod:string,msg:string,priority:int64,expire:duration,location:string,plugin:string,_write_ts:time}
type netcontrol_drop={_path:string,ts:time,rule_id:string,orig_h:ip,orig_p:port,resp_h:ip,resp_p:port,expire:duration,location:string,_write_ts:time}
type netcontrol_shunt={_path:string,ts:time,rule_id:string,f:{src_h:ip,src_p:port,dst_h:ip,dst_p:port},expire:duration,location:string,_write_ts:time}
type notice={_path:string,ts:time,uid:string,id:conn_id,fuid:string,file_mime_type:string,file_desc:string,proto:zenum,note:zenum,msg:string,sub:string,src:ip,dst:ip,p:port,n:uint64,peer_descr:string,actions:|[zenum]|,email_dest:|[string]|,suppress_for:duration,remote_location:{country_code:string,region:string,city:string,latitude:float64,longitude:float64},_write_ts:time}
type notice_alarm={_path:string,ts:time,uid:string,id:conn_id,fuid:string,file_mime_type:string,file_desc:string,proto:zenum,note:zenum,msg:string,sub:string,src:ip,dst:ip,p:port,n:uint64,peer_descr:string,actions:|[zenum]|,email_dest:|[string]|,suppress_for:duration,remote_location:{country_code:string,region:string,city:string,latitude:float64,longitude:float64},_write_ts:time}
type ntlm={_path:string,ts:time,uid:string,id:conn_id,username:string,hostname:string,domainname:string,server_nb_computer_name:string,server_dns_computer_name:string,server_tree_name:string,success:bool,_write_ts:time}
type ntp={_path:string,ts:time,uid:string,id:conn_id,version:uint64,mode:uint64,stratum:uint64,poll:duration,precision:duration,root_delay:duration,root_disp:duration,ref_id:string,ref_time:time,org_time:time,rec_time:time,xmt_time:time,num_exts:uint64,_write_ts:time}
type ocsp={_path:string,ts:time,id:string,hashAlgorithm:string,issuerNameHash:string,issuerKeyHash:string,serialNumber:string,certStatus:string,revoketime:time,revokereason:string,thisUpdate:time,nextUpdate:time,_write_ts:time}
type openflow={_path:string,ts:time,dpid:uint64,match:{in_port:uint64,dl_src:string,dl_dst:string,dl_vlan:uint64,dl_vlan_pcp:uint64,dl_type:uint64,nw_tos:uint64,nw_proto:uint64,nw_src:net,nw_dst:net,tp_src:uint64,tp_dst:uint64},flow_mod:{cookie:uint64,table_id:uint64,command:zenum=string,idle_timeout:uint64,hard_timeout:uint64,priority:uint64,out_port:uint64,out_group:uint64,flags:uint64,actions:{out_ports:[uint64],vlan_vid:uint64,vlan_pcp:uint64,vlan_strip:bool,dl_src:string,dl_dst:string,nw_tos:uint64,nw_src:ip,nw_dst:ip,tp_src:uint64,tp_dst:uint64}},_write_ts:time}
type packet_filter={_path:string,ts:time,node:string,filter:string,init:bool,success:bool,_write_ts:time}
type pe={_path:string,ts:time,id:string,machine:string,compile_ts:time,os:string,subsystem:string,is_exe:bool,is_64bit:bool,uses_aslr:bool,uses_dep:bool,uses_code_integrity:bool,uses_seh:bool,has_import_table:bool,has_export_table:bool,has_cert_table:bool,has_debug_data:bool,section_names:[string],_write_ts:time}
type radius={_path:string,ts:time,uid:string,id:conn_id,username:string,mac:string,framed_addr:ip,tunnel_client:string,connect_info:string,reply_msg:string,result:string,ttl:duration,_write_ts:time}
type rdp={_path:string,ts:time,uid:string,id:conn_id,cookie:string,result:string,security_protocol:string,client_channels:[string],keyboard_layout:string,client_build:string,client_name:string,client_dig_product_id:string,desktop_width:uint64,desktop_height:uint64,requested_color_depth:string,cert_type:string,cert_count:uint64,cert_permanent:bool,encryption_level:string,encryption_method:string,_write_ts:time}
type reporter={_path:string,ts:time,level:zenum,message:string,location:string,_write_ts:time}
type rfb={_path:string,ts:time,uid:string,id:conn_id,client_major_version:string,client_minor_version:string,server_major_version:string,server_minor_version:string,authentication_method:string,auth:bool,share_flag:bool,desktop_name:string,width:uint64,height:uint64,_write_ts:time}
type signatures={_path:string,ts:time,uid:string,src_addr:ip,src_port:port,dst_addr:ip,dst_port:port,note:zenum,sig_id:string,event_msg:string,sub_msg:string,sig_count:uint64,host_count:uint64,_write_ts:time}
type sip={_path:string,ts:time,uid:string,id:conn_id,trans_depth:uint64,method:string,uri:string,date:string,request_from:string,request_to:string,response_from:string,response_to:string,reply_to:string,call_id:string,seq:string,subject:string,request_path:[string],response_path:[string],user_agent:string,status_code:uint64,status_msg:string,warning:string,request_body_len:uint64,response_body_len:uint64,content_type:string,_write_ts:time}
type smb_files={_path:string,ts:time,uid:string,id:conn_id,fuid:string,action:zenum,path:string,name:string,size:uint64,prev_name:string,times:{modified:time,accessed:time,created:time,changed:time},_write_ts:time}
type smb_mapping={_path:string,ts:time,uid:string,id:conn_id,path:string,service:string,native_file_system:string,share_type:string,_write_ts:time}
type smtp={_path:string,ts:time,uid:string,id:conn_id,trans_depth:uint64,helo:string,mailfrom:string,rcptto:|[string]|,date:string,from:string,to:|[string]|,cc:|[string]|,reply_to:string,msg_id:string,in_reply_to:string,subject:string,x_originating_ip:ip,first_received:string,second_received:string,last_reply:string,path:[ip],user_agent:string,tls:bool,fuids:[string],is_webmail:bool,_write_ts:time}
type snmp={_path:string,ts:time,uid:string,id:conn_id,duration:duration,version:string,community:string,get_requests:uint64,get_bulk_requests:uint64,get_responses:uint64,set_requests:uint64,display_string:string,up_since:time,_write_ts:time}
type socks={_path:string,ts:time,uid:string,id:conn_id,version:uint64,user:string,password:string,status:string,request:{host:ip,name:string},request_p:port,bound:{host:ip,name:string},bound_p:port,_write_ts:time}
type software={_path:string,ts:time,host:ip,host_p:port,software_type:zenum,name:string,version:{major:uint64,minor:uint64,minor2:uint64,minor3:uint64,addl:string},unparsed_version:string,_write_ts:time}
type ssh={_path:string,ts:time,uid:string,id:conn_id,version:uint64,auth_success:bool,auth_attempts:uint64,direction:zenum,client:string,server:string,cipher_alg:string,mac_alg:string,compression_alg:string,kex_alg:string,host_key_alg:string,host_key:string,remote_location:{country_code:string,region:string,city:string,latitude:float64,longitude:float64},_write_ts:time}
type ssl={_path:string,ts:time,uid:string,id:conn_id,version:string,cipher:string,curve:string,server_name:string,resumed:bool,last_alert:string,next_protocol:string,established:bool,cert_chain_fuids:[string],client_cert_chain_fuids:[string],subject:string,issuer:string,client_subject:string,client_issuer:string,validation_status:string,_write_ts:time}
type stats={_path:string,ts:time,peer:string,mem:uint64,pkts_proc:uint64,bytes_recv:uint64,pkts_dropped:uint64,pkts_link:uint64,pkt_lag:duration,events_proc:uint64,events_queued:uint64,active_tcp_conns:uint64,active_udp_conns:uint64,active_icmp_conns:uint64,tcp_conns:uint64,udp_conns:uint64,icmp_conns:uint64,timers:uint64,active_timers:uint64,files:uint64,active_files:uint64,dns_requests:uint64,active_dns_requests:uint64,reassem_tcp_size:uint64,reassem_file_size:uint64,reassem_frag_size:uint64,reassem_unknown_size:uint64,_write_ts:time}
type syslog={_path:string,ts:time,uid:string,id:conn_id,proto:zenum,facility:string,severity:string,message:string,_write_ts:time}
type tunnel={_path:string,ts:time,uid:string,id:conn_id,tunnel_type:zenum,action:zenum,_write_ts:time}
type weird={_path:string,ts:time,uid:string,id:conn_id,name:string,addl:string,notice:bool,peer:string,source:string,_write_ts:time}
type x509={_path:string,ts:time,id:string,certificate:{version:uint64,serial:string,subject:string,issuer:string,not_valid_before:time,not_valid_after:time,key_alg:string,sig_alg:string,key_type:string,key_length:uint64,exponent:string,curve:string},san:{dns:[string],uri:[string],email:[string],ip:[ip]},basic_constraints:{ca:bool,path_len:uint64},_write_ts:time}

// This second block of type definitions represent changes needed to cover
// an out-of-the-box Zeek v4.1.0. In other Zeek revisions, we were accustomed
// to only seeing new fields added, but this represented the first time fields
// have changed, e.g., in SSL logs, "cert_chain_fuids" became "cert_chain_fps".
// Therefore we have wholly separate type definitions for this revision so we
// can cover 100% of the expected fields.

type ssl_4_1_0={_path:string,ts:time,uid:string,id:conn_id,version:string,cipher:string,curve:string,server_name:string,resumed:bool,last_alert:string,next_protocol:string,established:bool,ssl_history:string,cert_chain_fps:[string],client_cert_chain_fps:[string],subject:string,issuer:string,client_subject:string,client_issuer:string,sni_matches_cert:bool,validation_status:string,_write_ts:time}
type x509_4_1_0={_path:string,ts:time,fingerprint:string,certificate:{version:uint64,serial:string,subject:string,issuer:string,not_valid_before:time,not_valid_after:time,key_alg:string,sig_alg:string,key_type:string,key_length:uint64,exponent:string,curve:string},san:{dns:[string],uri:[string],email:[string],ip:[ip]},basic_constraints:{ca:bool,path_len:uint64},host_cert:bool,client_cert:bool,_write_ts:time}

const schemas = |{
"broker": <broker>,
"capture_loss": <capture_loss>,
"cluster": <cluster>,
"config": <config>,
"conn": <conn>,
"dce_rpc": <dce_rpc>,
"dhcp": <dhcp>,
"dnp3": <dnp3>,
"dns": <dns>,
"dpd": <dpd>,
"files": <files>,
"ftp": <ftp>,
"http": <http>,
"intel": <intel>,
"irc": <irc>,
"kerberos": <kerberos>,
"known_certs": <known_certs>,
"known_hosts": <known_hosts>,
"known_services": <known_services>,
"loaded_scripts": <loaded_scripts>,
"modbus": <modbus>,
"mysql": <mysql>,
"netcontrol": <netcontrol>,
"netcontrol_drop": <netcontrol_drop>,
"netcontrol_shunt": <netcontrol_shunt>,
"notice": <notice>,
"notice_alarm": <notice_alarm>,
"ntlm": <ntlm>,
"ntp": <ntp>,
"ocsp": <ocsp>,
"openflow": <openflow>,
"packet_filter": <packet_filter>,
"pe": <pe>,
"radius": <radius>,
"rdp": <rdp>,
"reporter": <reporter>,
"rfb": <rfb>,
"signatures": <signatures>,
"sip": <sip>,
"smb_files": <smb_files>,
"smb_mapping": <smb_mapping>,
"smtp": <smtp>,
"snmp": <snmp>,
"socks": <socks>,
"software": <software>,
"ssh": <ssh>,
"ssl": <ssl>,
"stats": <stats>,
"syslog": <syslog>,
"tunnel": <tunnel>,
"weird": <weird>,
"x509": <x509>
}|

// We'll check for the presence of fields we know are unique to records that
// changed in Zeek v4.1.0 and shape those with special v4.1.0-specific config.
// For everything else we'll apply the default type definitions.

yield nest_dotted(this) | switch (
case _path=="ssl" and has(ssl_history) => yield shape(<ssl_4_1_0>)
case _path=="x509" and has(fingerprint) => yield shape(<x509_4_1_0>)
default => yield shape(schemas[_path])
)

Leading Type Definitions

The top three lines define types that are referenced further below in the main portion of the Zed shaper.

type port=uint16;
type zenum=string;
type conn_id={orig_h:ip,orig_p:port,resp_h:ip,resp_p:port};

The port and zenum types are described further in the Zed/Zeek Data Type Compatibility doc. The conn_id type will just save us from having to repeat these fields individually in the many Zeek record types that contain an embedded id record.

Default Type Definitions Per Zeek Log _path

The bulk of this Zed shaper consists of detailed per-field data type definitions for each record in the default set of NDJSON logs output by Zeek. These type definitions reference the types we defined above, such as port and conn_id. The syntax for defining primitive and complex types follows the relevant sections of the ZSON Format specification.

...
type conn={_path:string,ts:time,uid:string,id:conn_id,proto:zenum,service:string,duration:duration,orig_bytes:uint64,resp_bytes:uint64,conn_state:string,local_orig:bool,local_resp:bool,missed_bytes:uint64,history:string,orig_pkts:uint64,orig_ip_bytes:uint64,resp_pkts:uint64,resp_ip_bytes:uint64,tunnel_parents:|[string]|,_write_ts:time};
type dce_rpc={_path:string,ts:time,uid:string,id:conn_id,rtt:duration,named_pipe:string,endpoint:string,operation:string,_write_ts:time};
...

Note: See the role of _path for important details if you're using Zeek's built-in ASCII logger to generate NDJSON rather than the JSON Streaming Logs package.

Version-Specific Type Definitions

The next block of type definitions are exceptions for Zeek v4.1.0 where the names of fields for certain log types have changed from prior releases.

type ssl_4_1_0={_path:string,ts:time,uid:string,id:conn_id,version:string,cipher:string,curve:string,server_name:string,resumed:bool,last_alert:string,next_protocol:string,established:bool,ssl_history:string,cert_chain_fps:[string],client_cert_chain_fps:[string],subject:string,issuer:string,client_subject:string,client_issuer:string,sni_matches_cert:bool,validation_status:string,_write_ts:time};
type x509_4_1_0={_path:string,ts:time,fingerprint:string,certificate:{version:uint64,serial:string,subject:string,issuer:string,not_valid_before:time,not_valid_after:time,key_alg:string,sig_alg:string,key_type:string,key_length:uint64,exponent:string,curve:string},san:{dns:[string],uri:[string],email:[string],ip:[ip]},basic_constraints:{ca:bool,path_len:uint64},host_cert:bool,client_cert:bool,_write_ts:time};

Mapping From _path Values to Types

The next section is just simple mapping from the string values typically found in the Zeek _path field to the name of one of the types we defined above.

const schemas = |{
"broker": broker,
"capture_loss": capture_loss,
"cluster": cluster,
"config": config,
"conn": conn,
"dce_rpc": dce_rpc,
...

Zed Pipeline

The Zed shaper ends with a pipeline that stitches together everything we've defined so far.

put this := unflatten(this) | switch (
_path=="ssl" has(ssl_history) => put this := shape(ssl_4_1_0);
_path=="x509" has(fingerprint) => put this := shape(x509_4_1_0);
default => put this := shape(schemas[_path]);
)

Picking this apart, it transforms reach record as it's being read, in three steps:

  1. unflatten() reverses the Zeek NDJSON logger's "flattening" of nested records, e.g., how it populates a field named id.orig_h rather than creating a field id with sub-field orig_h inside it. Restoring the original nesting now gives us the option to reference the record named id in the Zed language and access the entire 4-tuple of values, but still access the individual values using the same dotted syntax like id.orig_h when needed.

  2. The switch() detects if fields specific to Zeek v4.1.0 are present for the two log types for which the version-specific type definitions should be applied. For all log lines and types other than these exceptions, the default type definitions are applied.

  3. Each shape() call applies an appropriate type definition based on the nature of the incoming record. The logic of shape() includes:

    • For any fields referenced in the type definition that aren't present in the input record, the field is added with a null value. (Note: This could be performed separately via the fill() function.)

    • The data type of each field in the type definition is applied to the field of that name in the input record. (Note: This could be performed separately via the cast() function.)

    • The fields in the input record are ordered to match the order in which they appear in the type definition. (Note: This could be performed separately via the order() function.)

    Any fields that appear in the input record that are not present in the type definition are kept and assigned an inferred data type. If you would prefer to have such additional fields dropped (i.e., to maintain strict adherence to the shape), append a call to the crop() function to the Zed pipeline, e.g.:

    ... | put this := shape(schemas[_path]) | put this := crop(schemas[_path])

    Open issues zed/2585 and zed/2776 both track planned future improvements to this part of Zed shapers.

Invoking the Shaper From zq

A shaper is typically invoked via the -I option of zq.

For example, if we assume this input file weird.ndjson

{
"_path": "weird",
"_write_ts": "2018-03-24T17:15:20.600843Z",
"ts": "2018-03-24T17:15:20.600843Z",
"uid": "C1zOivgBT6dBmknqk",
"id.orig_h": "10.47.1.152",
"id.orig_p": 49562,
"id.resp_h": "23.217.103.245",
"id.resp_p": 80,
"name": "TCP_ack_underflow_or_misorder",
"notice": false,
"peer": "zeek"
}

applying the reference shaper via

zq -Z -I shaper.zed weird.ndjson

produces

{
_path: "weird",
ts: 2018-03-24T17:15:20.600843Z,
uid: "C1zOivgBT6dBmknqk",
id: {
orig_h: 10.47.1.152,
orig_p: 49562 (port=uint16),
resp_h: 23.217.103.245,
resp_p: 80 (port)
} (=conn_id),
name: "TCP_ack_underflow_or_misorder",
addl: null (string),
notice: false,
peer: "zeek",
source: null (string),
_write_ts: 2018-03-24T17:15:20.600843Z
} (=weird)

If working in a directory containing many NDJSON logs, the reference shaper can be applied to all the records they contain and output them all in a single binary ZNG file as follows:

zq -I shaper.zed *.log > /tmp/all.zng

If you wish to apply the shaper and then perform additional operations on the richly-typed records, the Zed query on the command line should begin with a |, as this appends it to the pipeline at the bottom of the shaper from the included file.

For example, to count Zeek conn records into CIDR-based buckets based on originating IP address:

zq -I shaper.zed -f table '| count() by network_of(id.orig_h) | sort -r' conn.log

zed/2584 tracks a planned improvement for this use of zq -I.

If you intend to frequently shape the same NDJSON data, you may want to create an alias in your shell to always invoke zq with the necessary -I flag pointing to the path of your finalized shaper. zed/1059 tracks a planned enhancement to persist such settings within Zed itself rather than relying on external mechanisms such as shell aliases.

Importing Shaped Data Into Zui

If you wish to browse your shaped data with Zui, the best way to accomplish this at the moment would be to use zq to convert it to ZNG as shown above, then drag the ZNG into Zui as you would any other log. An enhancement zed/2695 is planned that will soon make it possible to attach your shaper to a Pool. This will allow you to drag the original NDJSON logs directly into the Pool in Zui and have the shaping applied as the records are being committed to the Pool.

Contact us!

If you're having difficulty, interested in shaping other data sources, or just have feedback, please join our public Slack and speak up or open an issue. Thanks!