Zed/Zeek Data Type Compatibility

As the Zed data model was in many ways inspired by the Zeek TSV log format, the rich Zed storage formats (ZSON, ZNG, etc.) maintain comprehensive interoperability with Zeek. When Zeek is configured to output its logs in NDJSON format, much of the rich type information is lost in translation, but this can be restored by following the guidance for shaping Zeek NDJSON. On the other hand, Zeek TSV can be converted to Zed storage formats and back to Zeek TSV without any loss of information.

This document describes how the Zed type system is able to represent each of the types that may appear in Zeek logs.

Zed tools maintain an internal Zed-typed representation of any Zeek data that is read or imported. Therefore, knowing the equivalent types will prove useful when performing operations in the Zed language such as type casting or looking at the data when output as ZSON.

Equivalent Types

The following table summarizes which Zed data type corresponds to each Zeek data type that may appear in a Zeek TSV log. While most types have a simple 1-to-1 mapping from Zeek to Zed and back to Zeek again, the sections linked from the Additional Detail column describe cosmetic differences and other subtleties applicable to handling certain types.

Zeek Type	Zed Type	Additional Detail
bool	bool
count	uint64
int	int64
double	float64	See double details
time	time
interval	duration
string	string	See string details about escaping
port	uint16	See port details
addr	ip
subnet	net
enum	string	See enum details
set	set	See set details
vector	[array](/docs/v1.17.0/formats/zed#22-array
record	[record](/docs/v1.17.0/formats/zed#21-record	See record details

Note

The Zeek data types page describes the types in the context of the Zeek scripting language. The Zeek types available in scripting are a superset of the data types that may appear in Zeek log files. The encodings of the types also differ in some ways between the two contexts. However, we link to this reference because there is no authoritative specification of the Zeek TSV log format.

Example

The following example shows a TSV log that includes each Zeek data type, how it's output as ZSON by zq, and then how it's written back out again as a Zeek log. You may find it helpful to refer to this example when reading the type-specific details.

Viewing the TSV log:

cat zeek_types.log

Output:

#separator \x09
#set_separator  ,
#empty_field    (empty)
#unset_field    -
#fields my_bool my_count    my_int  my_double   my_time my_interval my_printable_string my_bytes_string my_port my_addr my_subnet   my_enum my_set  my_vector   my_record.name  my_record.age
#types  bool    count   int double  time    interval    string  string  port    addr    subnet  enum    set[string] vector[string]  string  count
T   123 456 123.4560    1592502151.123456   123.456 smile😁smile    \x09\x07\x04    80  127.0.0.1   10.0.0.0/8  tcp things,in,a,set order,is,important  Jeanne  122

Reading the TSV log, outputting as ZSON, and saving a copy:

zq -Z zeek_types.log | tee zeek_types.zson

Output:

{
    my_bool: true,
    my_count: 123 (uint64),
    my_int: 456,
    my_double: 123.456,
    my_time: 2020-06-18T17:42:31.123456Z,
    my_interval: 2m3.456s,
    my_printable_string: "smile😁smile",
    my_bytes_string: "\t\u0007\u0004",
    my_port: 80 (port=uint16),
    my_addr: 127.0.0.1,
    my_subnet: 10.0.0.0/8,
    my_enum: "tcp" (=zenum),
    my_set: |[
        "a",
        "in",
        "set",
        "things"
    ]|,
    my_vector: [
        "order",
        "is",
        "important"
    ],
    my_record: {
        name: "Jeanne",
        age: 122 (uint64)
    }
}

Reading the saved ZSON output and outputting as Zeek TSV:

zq -f zeek zeek_types.zson

Output:

#separator \x09
#set_separator  ,
#empty_field    (empty)
#unset_field    -
#fields my_bool my_count    my_int  my_double   my_time my_interval my_printable_string my_bytes_string my_port my_addr my_subnet   my_enum my_set  my_vector   my_record.name  my_record.age
#types  bool    count   int double  time    interval    string  string  port    addr    subnet  enum    set[string] vector[string]  string  count
T   123 456 123.456 1592502151.123456   123.456000  smile😁smile    \x09\x07\x04    80  127.0.0.1   10.0.0.0/8  tcp a,in,set,things order,is,important  Jeanne  122

Type-Specific Details

As zq acts as a reference implementation for Zed storage formats such as ZSON and ZNG, it's helpful to understand how it reads the following Zeek data types into readable text equivalents in the ZSON format, then writes them back out again in the Zeek TSV log format. Other implementations of the Zed storage formats (should they exist) may handle these differently.

Multiple Zeek types discussed below are represented via a type definition to one of Zed's primitive types. The Zed type definitions maintain the history of the field's original Zeek type name such that zq may restore it if the field is later output in Zeek TSV format. Knowledge of its original Zeek type may also enable special operations in Zed that are unique to values known to have originated as a specific Zeek type, though no such operations are currently implemented in zq.

double

As they do not affect accuracy, "trailing zero" decimal digits on Zeek double values will not be preserved when they are formatted into a string, such as via the ZSON/Zeek/table output options in zq (e.g., 123.4560 becomes 123.456).

enum

As they're encountered in common programming languages, enum variables typically hold one of a set of predefined values. While this is how Zeek's enum type behaves inside the Zeek scripting language, when the enum type is output in a Zeek log, the log does not communicate any such set of "allowed" values as they were originally defined. Therefore, these values are represented with a type name bound to the Zed string type. See the text above regarding type definitions for more details.

port

The numeric values that appear in Zeek logs under this type are represented in Zed with a type name of port bound to the uint16 type. See the text above regarding type names for more details.

set

Because order within sets is not significant, no attempt is made to maintain the order of set elements as they originally appeared in a Zeek log.

string

Zeek's string data type is complicated by its ability to hold printable ASCII and UTF-8 as well as arbitrary unprintable bytes represented as \x escapes. Because such binary data may need to legitimately be captured (e.g. to record the symptoms of DNS exfiltration), it's helpful that Zeek has a mechanism to log it. Unfortunately, Zeek's use of the single string type for these multiple uses leaves out important details about the intended interpretation and presentation of the bytes that make up the value. For instance, one Zeek string field may hold arbitrary network data that coincidentally sometimes form byte sequences that could be interpreted as printable UTF-8, but they are not intended to be read or presented as such. Meanwhile, another Zeek string field may be populated such that it will only ever contain printable UTF-8. These details are currently only captured within the Zeek source code itself that defines how these values are generated.

Zed includes a primitive type called bytes that's suited to storing the former "always binary" case and a string type for the latter "always printable" case. However, Zeek logs do not currently communicate details that would allow an implementation to know which Zeek string fields to store as which of these two Zed data types. Instead, the Zed system does what the Zeek system does when writing strings to JSON: any \x escapes used in Zeek TSV strings are translated into valid Zed UTF-8 strings by escaping the backslash before the x. In this way, you can still see binary-corrupted strings that are generated by Zeek in the Zed data formats.

Unfortunately there is no way to distinguish whether a \x escape occurred or whether that string pattern happened to occur in the original data. A nice solution would be to convert Zeek strings that are valid UTF-8 strings into Zed strings and convert invalid strings into a Zed bytes type, or we could convert both of them into a Zed union of string and bytes. If you have interest in a capability like this, please let us know and we can elevate the priority.

If Zeek were to provide an option to output logs directly in one or more of Zed's richer storage formats, this would create an opportunity to assign the appropriate Zed bytes or string type at the point of origin, depending on what's known about how the field's value is intended to be populated and used.

record

Zeek's record type is unique in that every Zeek log line effectively is a record, with its schema defined via the #fields and #types directives in the headers of each log file. The word "record" never appears explicitly in the schema definition in Zeek logs.

Embedded records also subtly appear within Zeek log lines in the form of dot-separated field names. A common example in Zeek is the id record, which captures the source and destination IP addresses and ports for a network connection as fields id.orig_h, id.orig_p, id.resp_h, and id.resp_p. When reading such fields into their Zed equivalent, zq restores the hierarchical nature of the record as it originally existed inside of Zeek itself before it was output by its logging system. This enables operations in Zed that refer to the record at a higher level but affect all values lower down in the record hierarchy.

For instance, revisiting the data from our example, we can output all fields within my_record using Zed's cut operator.

Command:

zq -f zeek 'cut my_record' zeek_types.zson

Output:

#separator \x09
#set_separator  ,
#empty_field    (empty)
#unset_field    -
#fields my_record.name  my_record.age
#types  string  count
Jeanne  122